此页面上的内容需要较新版本的 Adobe Flash Player。




Home
产品
Products
施工
Construction

球场设计和改造
Designs&Rebuilding
工程案例
Project Photos
质量认证
Certificate
联系我们
Contact
威力铺牌拼装运动地板
PP Sports Floor
 
   
  • 介绍
    Introduction
  • 颜色类型
    Color Type
  • 施工方法
    Installation
  • 工程案例
    Projects

 

PP拼装运动地板
Factory-made PP Court Plastic Floor


Vinilpave结构图说明 Section Graph:
1.止滑表面 Anti-skid surface
2.倒扣结构 Reverse lock
3.优良的回弹性 Polyester tensile
4.防盗设计 Design for to be Stolen
5.回弹垫设计 Design for tensile pad
悬浮式拼装地板也称组合式运动地板,是第四代体育运动地板的运动场地面层材料,成品为块状,规格为30.48cm×30.48cm×1.27cm,可直接铺装在水泥或沥青的基础表面,无需粘接,每一块地板之间用独特的锁扣进行连接,安装十分的简单,还可以随意拆卸。
  悬浮式拼装地板采用成熟的高强度聚丙烯环保材料,有效解决地板热胀冷缩问题的同时还具有稳定的表面摩擦,抗紫外线添加剂被加入到每一块地板中,能够保障地板在长期受日光照射中不褪色,悬浮式的结构设计加上坚固的加强型支撑脚结构,创造卓越的垂直的减震效果,防滑的表面可有效防止运动损伤,良好的球回弹性能和球速保证了地板卓越的运动性能,它可用于铺装理想的高性能篮球场、网球场、五人足
Made in factory,PP Court Plastic Floor is a kind of materials popularly used in  varieties of indoor and outdoor althletic courts such as  badminton, vallyball, tabletennis, basketball, tennisand handball.It characters qualities including shock-absorbing,  comfortable and durable. Easily cleant,easily installed. 

 

 


 

1 验收水泥基础,施工一层3-5mm水泥自流平材料,找平地面。达到3米直尺下偏差在3 mm之内。
2 养护时间到后,清除表面水泥渣和不平处。
3 弹线定位。
4 将宝时杰专用胶水用镘刀刮在位置上。待其变透明状,开始铺Vinilpave.
5 用优盾特制白色画线漆画线。
1 Smoothen the surface to be work on by applying a coat of 3-5mm self-levelling
cement product. Or construct a smooth surface with other material but cement.
The neglect deviation is below 3mm under a 3 metre straight ruler. 
2 Clear the cement surface after curing-time is over
3 Sign the position for lay PVC mat according to the size of PVC mat.
4 Scrape the adhesivs on the position with trowels.The adhesive will turn to  the
transparent glue after ten minutes.It is time to lay down PVC mat.
5 Check the quality of every roll.Do not apply any bad quality roll if there is.
6 Spread the roll on the position on which is troweled with the glue,try to leave less than
a minometre of seam between two mats.
7 Press mat with paper roll to adhesive closely and push out air between two layers
8 Weld the seam by hot gun after curing thoroughly
9 Lining.        

 

 

 

 

 

 

广州金力美建材实业有限公司
工信部备案/许可证号:粤ICP备17021946号
版权所有,抄袭必究
Tel:020-82581086 Fax:020-82037502